Dropping Networks

As do mine.  The fix is in beta testing now. 

Originally posted by Comporder1 Originally posted by LightsOnLogan Ok, you are definately losing lock between sequences then.    1.0.69 partially corrected a bug with the heartbeat lock between sequences experienced by some.  Since you are losing lock between sequences, you should upgrade.  Remember to fully uninstall from add/remove programs, reboot, perform the 1.0.69 install, then reboot again before using Aurora. Micheal, So are you saying that the controllers NOT supposed to wink between sequences? Mine do. Carey

Just to document the total fix for the problem in this thread, I need to post this update.  My show is no longer dropping, but it was a combination of two different things causing it.  The USB 485 drivers were not both the same version causing the controllers to lose lock between sequences.  Updating them both to the same version fixed this.   Also, my heater fan motor was causing "noise" to get back to my computer through the network cable causing the ports to lock.  I purchased some filtered USB cables and fixed this issue.  I would recommend everyone use a filtered USB cable just to prevent this.

Originally posted by MrChristmas2000 I've read the whole post and don't see anywhere you list your PC Hardware and OS. This almost sounds like something has either gone wrong with your hardware (i.e. motherboard) or the systems OS (mabey the USB drivers). Do you have any other programs running including anything in your system tray?

I have tried this on three different computers.  A Win 7 computer, a win XP computer and a Win Vista computer.  Nothing in running in the system trays of any of these.  It is totally random on when it dropps and which of the three networks it dropps.  The win 7 computer is a dual core interl centrino with 4 gb of ram.  The win vista computer is a quad core with 8 GB of ram.  The win 7 computer is a dual core centrino with 1 gb of ram.  All of them do the exact same thing.  What harware problem could cause the comm port to "lock" up during a show?

Ran this tonight and it dropped all of my networks.  It did this twice.

Try this for lagging networks (requires 1.0.69 to be installed to function properly) :

http://www.aurorashow.com/downloads/aurora_1_0_76_exe_files.zip

Place the files into your Aurora directory and uset the _76 executable to launch Aurora instead of the default files.  Do not attempt this with any version other than 69 installed.

This is still in beta testing, but given the circumstances (a BIG show stopping issue), I'm also pushing the beta files directly to the public as they develop.