| Main Hardware Software Cables/Adapters Forum Contact |
|
|
Post Reply 
|
Page <123> |
| Author | |
LightsOnLogan 
Admin Group 
Joined: 11 Oct 2007 Online Status: Offline Posts: 3187 |
 Quote Reply
 Posted: 17 Dec 2007 at 9:56am |
|
I can't open your dls file... my download appears to be corrupt (tried to download it twice). Could you please .zip the file and email it to me. Was this an imported sequence? Have you tried to delete and recreate that one section (all channels) with Aurora (it is possible that there was something odd in the original sequence that was imported)?
|
|
|
|
 |
|
|
peteandvanessa
Beta Testers 
Joined: 11 Dec 2007 Location: Rocklin, CA Online Status: Offline Posts: 206 |
Quote Reply
Posted: 17 Dec 2007 at 10:05am |
|
There is something odd on his Spiral trees channel. Many of the fades aren't correct within the sequence. They look almost correct, but if you use the infor button you realize the fades are set correctly.
|
|
|
|
|
Comporder1
DMX
Joined: 11 Dec 2007 Location: Brookhaven, MS Online Status: Offline Posts: 163 |
Quote Reply
Posted: 17 Dec 2007 at 10:09am |
Right. The spiral trees are following the vocal in the song. I intended for them to be that way.
Thanks for taking the time to check it out.
Carey
|
|
|
|
|
Comporder1
DMX
Joined: 11 Dec 2007 Location: Brookhaven, MS Online Status: Offline Posts: 163 |
Quote Reply
Posted: 18 Dec 2007 at 8:32am |
Sorry. I didn't see this post until just now. I will send it right away, except I am not sure what email to send it to. I have a few associated with the order process (paypal, order confirmation, etc.) Let me know where it should go.
In the mean time I posted it up here:
I didn't have a chance to do any testing yesterday. I had my turn shopping with the wife! I should have time today.
Carey Edited by Comporder1 - 18 Dec 2007 at 8:33am |
|
|
|
|
Comporder1
DMX
Joined: 11 Dec 2007 Location: Brookhaven, MS Online Status: Offline Posts: 163 |
Quote Reply
Posted: 18 Dec 2007 at 8:39am |
|
Answer to your questions:
The file was originally created in Spectrum by yours truly. I imported it into Aurora. I did not delete everything and start over, but i did recreate/redraw the events over the original events. Hope that makes sence. I will play with it today.
Carey
|
|
|
|
|
LightsOnLogan
Admin Group
Joined: 11 Oct 2007 Online Status: Offline Posts: 3187 |
Quote Reply
Posted: 18 Dec 2007 at 10:43am |
|
Download of the zip file worked... thanks. I will check this out and let you know what I find.
|
|
|
|
|
|
|
|
Comporder1
DMX
Joined: 11 Dec 2007 Location: Brookhaven, MS Online Status: Offline Posts: 163 |
Quote Reply
Posted: 18 Dec 2007 at 11:11am |
|
Thanks!
|
|
|
|
|
LightsOnLogan
Admin Group
Joined: 11 Oct 2007 Online Status: Offline Posts: 3187 |
Quote Reply
Posted: 18 Dec 2007 at 11:58am |
|
The good news: Your sequence file is good... everything looks right there (spiral trees are not causing any issues as has been suggested). I can replicate what you are describing on my ACx16 v1.13. Ramps of just slightly under 2 seconds do not render properly on ACx16 1.13. Furthermore, I have isolated the exact bad section of Aurora code that is causing the bug. The sort-of good news: You can work arround this issue by shortening the ramp slightly. If you delete the existing ramps and create new ones that are 1.8 seconds instead of 2 seconds they will render properly. Actually, you should be able to create ramps 1.899 or 2.001 seconds. It is between 1.9 and 2.0 seconds that is affected by this issue.
The not-as-good news: A "fix" for the "1.9 to 2.0 ramp duration issue" will not be available until the 0.3 beta comes out. Until then you will need to use the "sort-of good" workaround above.
|
|
|
|
|
|
|
|
Comporder1
DMX
Joined: 11 Dec 2007 Location: Brookhaven, MS Online Status: Offline Posts: 163 |
Quote Reply
Posted: 18 Dec 2007 at 12:21pm |
|
HA! No problem! I am glad I helped your discover the bug.
I have another sequence with a very obvious output problem if you want to take a look. You can get it here: http://files-upload.com/files/685860/Wizards_in_Winter.zip
Carey
|
|
|
|
|
deweycooter
Development
Joined: 14 Oct 2007 Location: League City, TX Online Status: Offline Posts: 674 |
Quote Reply
Posted: 20 Dec 2007 at 8:52am |
|
I assume the ramp issue does not depend on the ramp direction? Here is a video of where I see it - the natural trees (not the megas, not the minis) are supposed to be ramping up green while ramping down red, then ramping down green while ramping up red. Guess what - right around 2 seconds: video
btw - these trees are on the same controller, an ACx8 running v1.12. Issue 2 - for some reason, my ACx16 (still v1.12) that controls my mega tree on the right seems to miss events. Watch 1:23 and 2:04 in this video. The middle tree does its thing, then it repeats joined by the left and right trees. Notice the right tree misses most of it. The trees are given the same commands and all firmware settings are defaulted. I have 9 controllers (ID 11-19) with the left/middle/right being 17/12/19. I'm starting to talk myself into believing it's a firmware setting...otherwise wouldn't there be loads of people talking about it? |
|
|
|
|
Post Reply
|
Page <123> |
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Output errors
Topic Options