DMX is almost here!

Not all the RGB channels seem to have the problem - some controllers are ok and others are not. In this instance controler ID 'B' has the problem but it doesn't seem to be related to the controller ID either.

 

There don't seem to be any 'ghosted events' in the sequence either. I set the questionable controller B to 10 , then added a new controller 'B'. In the past if there were what I'll call ghosted events they would often times show up on the newly added controller. That didn't happen. I deleted all other channels in the event that somewhere something on another channel might be causing the problem - no good -  with only the 1 dcx16 (ID B) in the sequence and no events showing in sequence there's still blinky-blinky. Erase the channels and blinky stops - save the file, exit aurora - even reboot - open Aurora, reload the file, no events showing in the sequence, just the time lines, run the sequence and RGB channels are going wild blinking..  Actually looks like a twinkle is happening across all 3 channel rgb channels - all reds together, all greens together, all blues together. (I had a sequence where they all shimmered together). Set the RGB channel color to black and sort of brute-force turn them off and that seems to work to stop the unsequenced events since there's acually something (no color) sequenced. But that's not a desirable way to have to sequence the problem channels.

 

Hopefully, as was indicated, this may be corrected in the next release since it appears from the response I got to RGB issues a good portion, if not all, of the code has been undergoing an overhaul.

If we'll need to order the DMX adapter through Aurora is there any way we can do that now? (even if it's pre-order again)