Aurora Homepage
Forum Home Forum Home > Aurora Sequencer Software > Aurora 1.0 > Aurora 1.0.90 In DMX Mode
  Active Topics Active Topics
  FAQ FAQ  Forum Search   Calendar   Register Register  Login Login

CAT5 pins for dmx data transmission

 Post Reply Post Reply
Author
Message
  Topic Search Topic Search  Topic Options Topic Options
ATController View Drop Down
Newbie
Newbie


Joined: 14 Oct 2009
Online Status: Offline
Posts: 10
  Quote ATController Quote  Post ReplyReply Direct Link To This Post Topic: CAT5 pins for dmx data transmission
    Posted: 12 Mar 2011 at 8:25am
First I'm extremely new to DMX, I'm contemplating a project shown at HolidayCoro.com under the corostar assembly instructions;RGB corostars.  In using Aurora DMX, which CAT5 pins are used for the DMX data transmission?  Just so I understand this whole process I can use the D-Light usb dongle to interface the described DMX Module in their instructions to control the rgb lights? 

Thanks for any feedback on this subject
Kevin


Edited by ATController - 12 Mar 2011 at 8:26am
Back to Top
deweycooter View Drop Down
Development
Development


Joined: 14 Oct 2007
Location: League City, TX
Online Status: Offline
Posts: 674
  Quote deweycooter Quote  Post ReplyReply Direct Link To This Post Posted: 14 Mar 2011 at 11:14pm
You need to build a standard ethernet cable, but switch wires 1&2 with 4&5 on one end.

http://diylightanimation.com/wiki/index.php?title=Image:DLA-RJ45-wiring.jpg
Back to Top
JonB256 View Drop Down
DMX
DMX
Avatar

Joined: 19 Dec 2007
Location: Granbury, TX
Online Status: Offline
Posts: 130
  Quote JonB256 Quote  Post ReplyReply Direct Link To This Post Posted: 26 Mar 2011 at 9:05am
For the existing controllers out there using CAT5, Pins 1 and 2 (Lynx Express, specifically), the "Data -" is on the Orange wire (Pin 2) and the "Data +" is on the White/Orange wire (Pin 1).

The LOR and D-Light boards use Pins 4 and 5, but "Data -" is on Pin 4 and "Data +" in on Pin 5.

So you have to build a "crossover" with a "crossover" since DMX is polarity sensitive. (i.e., Pin 1 to Pin 5 and Pin 2 to Pin 4)

Edited by JonB256 - 26 Mar 2011 at 9:07am
JonB - D-Light user
Back to Top
deweycooter View Drop Down
Development
Development


Joined: 14 Oct 2007
Location: League City, TX
Online Status: Offline
Posts: 674
  Quote deweycooter Quote  Post ReplyReply Direct Link To This Post Posted: 28 Mar 2011 at 10:38am
hmm, that's interesting.  I'll have to double check how I did it.  I don't remember crossing them.
Back to Top
ChrisL1976 View Drop Down
Beta Testers
Beta Testers


Joined: 01 Sep 2008
Location: Kankakee, Ill
Online Status: Offline
Posts: 1341
  Quote ChrisL1976 Quote  Post ReplyReply Direct Link To This Post Posted: 28 Mar 2011 at 11:24am
I moved Pin 1 to pin 4 and pin 2 to pin 5 and vice versa
Chris

www.lightsonsixth.com
Back to Top
JonB256 View Drop Down
DMX
DMX
Avatar

Joined: 19 Dec 2007
Location: Granbury, TX
Online Status: Offline
Posts: 130
  Quote JonB256 Quote  Post ReplyReply Direct Link To This Post Posted: 30 Mar 2011 at 5:52am
I just looked at my working adapter and it is 1 to 5 and 2 to 4. If I get a chance, I'll make another going from 1 to 4 and 2 to 5 to see if also works. (I think I did that a few months ago but can't be positive)
JonB - D-Light user
Back to Top
 Post Reply Post Reply

Forum Jump Forum Permissions View Drop Down

Bulletin Board Software by Web Wiz Forums® version 9.06
Copyright ©2001-2007 Web Wiz

This page was generated in 0.641 seconds.